Auto Cad Term 2
For my first drawing for term 2 we learned a new way to draw in 3-D. The new tool is called isometric drawing. This makes the lines at 150 and 30 degrees. Also we learned how to use the hatch command which allows us to put colors in our drawing. Another comand i learned was the arc/isometric drawing which puts circles in perpective with your drawing. With all the newly learned techniques i finished my firt ortho drawing for term 2.
For ortho 3 I learned how to use the ublique tool which allows me to put measurements in perspective with the drawing. With problem solving stragies I found out the measurements of all the sides and completed ortho 3.
For ortho 4 it was basically the same as the other ortho drawings but i had to use many problem soving methods to solve. Some of the varises ways were how i found the places were the 2 circles are located on the lower section of the shape. i started by making a line the size of 1" from the left conor. From that end point i made a line the size of .75 going parllel to the line thats 3.5". at the endpoint of that line a used the arc isolmetric tool to make a circle with a radius of .25from the ceter of that circle i contiuend the line to .75" and found the other circle. I then coonitued to work intil i completed ortho 4.
Ortho 5 was just like ortho 4 i didnt ahve to learn any new techniques it was basicallly a review. so i completed ortho 5 with little problems.
For Ortho 7 was very easy using what i already know i finished the drawing with in 10 min. I learned how to wright words out on the drawing as shown by the R=.25.